Ningbo Sabe Machinery Manufacturing
Brass Push-In Fittings

Metal/Brass Push-In Fittings

Features

  1. Simply to install & uninstall with no tools.
  2. Stainless steel tube locking mechanism.
  3. Thread sealant on taper threads, O-ring face seal on G threads.
  4. NBR as the standard sealing material,other materials are available upon request.
  5. Nick plated is standard for bass surface treatment, ensure anti-corrosion and anti-contamination.
  6. Reuseable-Can be assembled and disassembled repeatedly. (recommend to cut the surface-damaged part of tube)
  7. Thread: BSPP, BSPT, NPT (Please contact us for other styles)

Construction

Brass Push To Connect Fitting

Specification

O-Ring Seal NBR (other materials are available upon request)
Gripping Mechanism Stainless Steel
Temperature Range 32° F to 176°F (higher temperature are possible with special O-rings)
Pressure Max 230 PSI (mainly limited by tube's enduring)
Vacuum Duty 29.5 Inch Hg
Media Compressed Air

Note: These meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.

Installation Instructions

Thermoplastic Push In Fittings Assemble Thermoplastic Push In Fittings Disconnect
Figure 1 Figure 2

To connect tube (see figure 1)

  1. Cut tubing squarely–maximum of 15° angle allowable.Use of tube cutter (PTC) is recommended.
  2. Check that port or mating part is clean and free of debris.
  3. Insert tube into fitting until it bottoms.Push twice to verify that tubing is inserted past collet & O-Ring.
  4. Pull on tubing to verify it is fully inserted.

To disconnect tube (see figure 2)

  1. Simply press release button, hold against body, and pull tubing out of fitting.

Products Overview Brass One Touch Fittings >

Tube to Pipe Range Tube To Tube Range

Metal Push In Fittings

Brass Push In Fittings