Brass Push-On Hose Barb Fittings

Features

1. reusable push-on fittings easy to use for various fluids
2. Low cost & Easy to maintenance
3. No clamps or special tools are required during installation

Application

1. Air-brake systems
2. Flammable gases
3. Refrigeration and air-conditioning systems
4. Low pressure hydraulic systems accepting extreme pulsations

Specification

1. Air (inside + outside) up to max. + 70° C
2. Oil-enriched compressor air
3. Water (inside + outside) up to max. + 82° C
4. Coolants,Antifreeze,Lubricant oil,Fluids with a mineral oil base

Installation Instructions

Assemble

1. Cut the hose cleanly and squarely.
2. Lubricate the Push-Lok fitting with light oil like soapy water only.
3. Insert fitting into hose and push down to the stop.

Disassemble

1. Cut the hose longitudinally along a line at a slight angle from the centre line of the hose. (Be careful not to nick barbs when cutting hose)
2. Disengage the fitting from the hose.

Products Overview Push-Lok Hose Barbs Fittings >