Brass Pneumatic Rapid Tube Fittings / Reusable Tubing Fittings

Interchange With
Camozzi - Rapid Fittings, Norgren - Push-On Tube Fittings, Pneumax - Quick Fittings

Features

1. Ideally use in vacuum systems & confined spaces where tight bend radii are required.
2. For simple and quick connection of pneumatic circuits even without the use of a spanner.
3. Unique barb shape ensures good grip on tube even if just tightened by hand.
4. The special shape of the guiding cone avoid that the tube rupture accidentally.
5. Corrosion resistant thanks to Nickel plated.
6. Tubing locking nuts included.
7. Recommend Plastic Tube: PA polyethylene braided PVC rilsan polyurethane, also be used with rigid PA tubes.

Specification

1. Material: Nickel-Plated Brass.
2. Media: Compressed air low pressure fluids as Computer Water Cooling System.
3. Thread: BSPP & BSPP as standard, other styles available on request.
4. Operating pressure: Vacuum -15 bar (mainly depending on tube's endurance)
5. Temperature: -18°C to +70°C. Mainly as per tube performance.

Installation Instructions

1. Place the knurled nut over the tube. See figure 1
2. Push the tube over the barbed end of the fitting up to the tube stop. See figure 2
3. Screw the knurled nut onto the fitting until finger or wrench tight. (The hexagon on the nut is to aid release) See figure 3

Click Here For Overview Of Brass Screw-On Compression Fittings

Quick Fittings - Tube To Pipe	Quick Fittings - Tube To Tube	Quick Fittings - Banjo	Quick Fittings - Compact

Page <1> <2>